Looker 02

looker 02

März Keuschheitsgürtel Keusch Steelworxx Steelworx CB CB Loocker Loocker Hallo liebe Gleichgesinnte, Wir tragen uns mit dem Gedanken den Looker 02 von Steelworks Links nur für Mitglieder für die Keuschhaltung unseres Subs zu. Mai erfahrungen mit dem penisplug im steelworxx looker Ich trage eine Locker02, er ist so ähnlich wie das Modell was Kedo hier beschrieben hat.

Not with my current lifestyle. The entire field seems to have been taken over by smaller trapped-ball devices now. I might end up with a UTI or I might not.

Or something so much like it as to make no difference. It all started a week ago last Friday. Belle and I were at dinner and I started to feel achy.

My assumption was I was just feeling the affects of my morning workout and thought nothing more of it. The achiness continued as I went to bed so I took ibuprofen.

But it got worse. And I got the chills. And I started to feel feverish. And, most importantly, I had to pee. Over and over again. I was in the Steelheart and had been for a few days since Belle came home.

But based on the symptoms, it was clear to her, me, and WebMD that I had some kind of infection either of the prostate or the urinary tract.

So I went immediately to the clinic. The very nice nurse at the clinic was perplexed. She took my temp, all the vitals, and my symptoms and then had me pee in a cup.

Yep, while cell count was sky-high. She was still perplexed. She asked me if I was sexually active. Of course, I said. Sometimes yes, sometimes no.

In reality, hardly ever. She told me I should. I said OK, I would. Earlier in the week, while still wearing the L02, I spent an enjoyable morning with a new anal toy from Mr.

In any event, I really went to town on this thing and, my presumption is, at some point this is what led to the UTI.

Bacteria must have gotten on the device and then migrated up the insert. After, I showered and cleaned myself up pretty well, but not well enough, apparently.

In any event, that must have been when the damage was done. So she prescribed an antibiotic and that made me feel tons better after about 36 hours.

For the next five days, though, peeing was difficult. I had to bear down hard on my bladder to get even a little trickle out. It felt as though I was never really done at any point.

Later the same night after I got my meds, Belle took pity on my and let me out of the Steelheart. Not sure what moved her to do so at that particular time, but I was out until yesterday after I got back from a weekend trip with some friends.

So, what to make of this experience? On the one hand, it was totally avoidable. Now I know to be very careful if those two things happen at the same time.

In fact, I should perhaps put a condom over the L02 when the time comes. This is the first time I ever got sick doing so.

Luckily, as I suspected two years ago, the UTI was easily dealt with and a bummer of a thing to have. I have been a very bad chastity blogger.

I deserve to be punished. In truth, I have yet again totally ignored my DT email address and a whole lot of feedback has piled up and I truly do feel guilty about not replying.

So, without further ado, here we go…. Have you ever tried a PA lock of the style before? My concerns are the same as yours, though.

It looks hot, though. When I first noticed its availability, I wrote a post about it. More thoughts over there. I am looking at getting a Looker2 as my first steel device and was wondering would you suggest ordering it the way it comes?

I like the bulb myself. Subjectively, I just like how it looks and the feel of the little bulge deep down in there. Sometimes, when I really have to go, I find the narrow tube slows things down.

There is so much great info in it. I find myself returning every few months to catch up and re-reading a lot of the valuable info.

Thank you for taking the time and energy to teach us Want-To-Be-Thumpers! You have said that the same size A Ring in plastic and steel did not work.

I eventually settled into 40mm in the Steelheart but find the 42mm anatomical ring of the Looker 02 to be a much better fit.

Remember that the size you wear in a cock ring will be much too big for a chastity device. Cock rings assume a big old erection on the other side while a device will keep that mostly in check.

The less room your erection has to grow, the less room you need in the ring. How should I determine spacing between the Tube and A ring? But the Steelheart appears to have less space at the top and more at the bottom.

If this is a set parameter on the Steelheart, then do you add or subtract to the length of the tube to make up for this difference in measurement?

This gap is a function of the A-ring size and is another reason why getting that right is important. In the three devices I have from Dietmar, I always went with the default.

Have you tried this one? It seems like if the bottom of the ring curves back against the abdomen, the space between the bottom of the Ring and the bottom of the Tube gets even bigger, which sounds bad for security.

Yep, the Looker 02 has that and I love it. I also wear a 4ga ring, but not with the Steelheart. I found it took too much space inside the tube and caused pinching.

I wear a 10ga ring when locked up. Sounds like your experience is that you cannot fit anything larger than 8 gauge jewelry inside.

I bet I could get even larger jewelry in there, but the heavier the ring the more noise will be made as it hits the inside of the tube.

How much added length and diameter should I add to the Tube to accommodate the PA fixing and jewelry, to achieve your setup? Finally, I also want to order a urethral insert for some added fun from time to time.

I realize I probably have to remove the PA for that. Do you use the insert with your Steelheart or only on your Looker? Any thoughts on how long the insert should be?

Is this purely personal choice or are there any security benefits? Does your insert have a bulb on the end?

If yes, do you like it? Does it help with leakage? Does the insert have a cap to screw on the end or is it always open at the end and prone to leaking?

A Only on the Looker It could be a bit longer and still work. C See question above. I do like the bulb.

It may help with leakage. D The insert on the L02 I wear is integrated. This guarantees longer wear time without pressure marks like you are used to from us: Feel just a maximum touch….

Avoid stimulating the glans… For uncircumcised men the half-cup over the glans allows better comfort. Let yourself be captured and preserve your chastity.

So that you always look damn good with our products… The exclusive product, customised to fit you, is like a net around your penis!

The roundness of the plug protects the urethra!! It will take you captive unshakeably. Experience complete dependency on your key holder! I think this is the reason I can not wear a regular cock ring like the one shown here.

If I can get my cock and balls through it, my balls will work their way out during the night. For that reason I have to wear a hinged ring that is very tight.

You said something about being able to get away with a larger A ring than normal. Do you think I might be able to up the size one notch and therefore be more comfortable.

I realize this may be hard to answer. Finally, when you measured and ordered, did you and any extra room in length or width.

If so was it a good idea, if not, does it feel as good as I imagine it would to have it fit like a glove? My ring is about 43mm in diameter. I probably could have made the cage just a big shorter.

The circumference of the cage was the same as my Steelheart. It seems to work for me, though it could have been just a tad smaller and still work.

I often modify chastity devices. Some years ago I was experimented with a CB3K fitted with an adapted metal A ring and support system. Later I turned up a plug in Stainless, about 70mm long, with a flange that kept it inside the device.

This was inserted before the device was assembled and it worked OK, but tended to leak slightly. After I read this I made a replacement with a bulb tip similar to the above and added a press fit stopper for the tip.

This works well, the stopper is simple to remove when needed. Perhaps something similar can be made for your device. How can I send them to you?

Does it stay that way, permanently or semi-permanently? Does it slam shut as if nothing was in there? It gapes for a little while but closes up again.

My question is whether or not there is like an end cap to close the opening of the urethral plug? You might be able to fashion one after the fact, but it might fall out.

Or Dietmar might be able to put some kind of screw-on thing. I had similar concerns and made some extra wands plugs to use with my Looker 2.

I turned screw in M4 plugs in Stainless to fit them. One issue was dropping the tiny things when screwing them back in!

So I skim them back; leaving a 10mm smooth section that slide in, thus locating the cap; followed by just 4mm of thread to secure it.

This works very well and is water tight. It also has a 2mm contact. Dietmar made a M3. This gave me an idia about the air-locking problem, what if the tube was rifled?

The vortex should suck the air right out. Sure, individual anatomies vary. When I wear it I spend the day in a state of semi arousal.

I really enjoy the feeling of the insert. They offer a penis ring size that is 1mm larger than my own shaft size.

After having your L02 for some time now, would recommend ordering the size nearest to my own, or go up one size?

I see in your pic that there is space on your underside, caused by the urethral tube keeping everything centered. But, does your shaft press firmly against the top?

Hell, you even risk UTI without ever wearing a plug. The length of the Locker02 tube Thumper is using seems pretty decent to me without invading the body too much.

I think nothing non-medical should ever get near the place where the semen tube joins the urethra, and even less up the bladder of course.

Disregarding the risk of using non-surgical grade plastic, imagine that for some reason the metal end gets lose inside your body… yeah, I let you imagination work on that.

I think two precautions here can greatly reduce the risk again: After removal, clean it throughly, and maybe put it a few minutes in boiling water.

Also, keep it in a clean box, not just on some dusty shelf. There are two liquids that will be in contact with the plug. It will keep both the inside and the outside of the plug clean, like it does normally for the inside of the urethra.

Drinking normally and regularly going to the toilets will do just fine. BUT urine is usually not in contact with metal, and it may crystallize on the inside but also the outside of the tube, making the surface rough, which may cause lesions during insertion or removal.

For this, cleaning the device with soap and water as soon as removed, shrubbing it to remove any residue, is a good idea, before you boil it.

Pre-cum fluid WILL happen. The tube is inserted in your penis, which is highly sensitive, and some semen will be produced and pass the tube.

Semen can dry inside, turning it into a nasties nest. This also means you have to clean both the outside but also the inside of the tube. Boiling the device should remove some of the residue, but using something to scrub the inside would be ideal.

Well, point 1 seems to bring to the conclusion that removing and reinserting the device too often is more dangerous, while point 2 says quite the opposite, and that the device needs regular maintenance to stay as safe as possible.

I personally think that the period between two insertions should not be less than a week. If you remove and insert it every day or two days, you greatly increase the risk of getting nasties in your body.

But it should also not be much longer, since then you take the risk of having crystals forming on the tube, and you may have difficulties removing the device, eventually harming yourself.

The crystal thing depends on the composition of your urine, so experiences may vary as usual. Thumper, are you able to provide a photo measuring the size of the plug and ball at the end?

To be honest, the plug looks smaller than the 8 sound. I have some concerns about ordering a device with a bulb on the end that would be too big to fit up my urethra.

Most commercial sounds are listed and fabricated in millimetre diameter sizes. The Looker 2 plugs have been made in various sizes.

Verwandte Themen anschauen Neues Thema eröffnen. Ich habe eine Fußball lotto die mitlest, sich aber vorbehält hier nichts zu schreiben. The material consists of stainless steel and was polished to high gloss. Dieser Stahl Keuschheitsgürtel werden Sie Ich werde auf Yahoo messenger online Beste Spielothek in Karlsthal finden latexmma aber auch hier mitlesen. Im schlimmsten Fall kommt es zu unkontrollierten Wettbasis com tipps je nach Alter und anderen Aspekten etwas unterschiedlich sein kann. Ich habe beim Anlegen book of ra online casino deutschland nichts gemerkt Noch habe ich ein paar Tage in Freiheit - Steelworxx hat ja z. Glückwunsch video kostenlos habe beim Anlegen gar nichts gemerkt Jetzt Amazing Heroes Slot Machine - Find Out Where to Play Online dem Lookr nicht mehr! Wir halten alle die Schlüssel für dein Keuschheitsgerät Aber da ist die Verheilung doch erstens viel weniger intensiv und zweitens ein Piercing das wesentlich einfacher zu casino texas holdem nasД±l oynanД±r ist und bestimmt auch viel öfter slots macau wird in den Studios und daher auch mehr Erfahrung da ist!!

Looker 02 Video

Detonado Pokémon Platinum #02 - CONHECENDO LOOKER/GANHANDO ROCK SMASH (2017)

Looker 02 -

Wenn du Dir den Locker 02 mit abnehmbaren Plug nimmst, kannst Du dann ja auch mit einem 2. The following ring sizes are deliverable: The diameter of the Plugs is 8 mm 0. Shopping Cart 0 items! Cockring solid 45mm 1.

She told me I should. I said OK, I would. Earlier in the week, while still wearing the L02, I spent an enjoyable morning with a new anal toy from Mr.

In any event, I really went to town on this thing and, my presumption is, at some point this is what led to the UTI. Bacteria must have gotten on the device and then migrated up the insert.

After, I showered and cleaned myself up pretty well, but not well enough, apparently. In any event, that must have been when the damage was done. So she prescribed an antibiotic and that made me feel tons better after about 36 hours.

For the next five days, though, peeing was difficult. I had to bear down hard on my bladder to get even a little trickle out. It felt as though I was never really done at any point.

Later the same night after I got my meds, Belle took pity on my and let me out of the Steelheart. Not sure what moved her to do so at that particular time, but I was out until yesterday after I got back from a weekend trip with some friends.

So, what to make of this experience? On the one hand, it was totally avoidable. Now I know to be very careful if those two things happen at the same time.

In fact, I should perhaps put a condom over the L02 when the time comes. This is the first time I ever got sick doing so. Luckily, as I suspected two years ago, the UTI was easily dealt with and a bummer of a thing to have.

I have been a very bad chastity blogger. I deserve to be punished. In truth, I have yet again totally ignored my DT email address and a whole lot of feedback has piled up and I truly do feel guilty about not replying.

So, without further ado, here we go…. Have you ever tried a PA lock of the style before? My concerns are the same as yours, though. It looks hot, though.

When I first noticed its availability, I wrote a post about it. More thoughts over there. I am looking at getting a Looker2 as my first steel device and was wondering would you suggest ordering it the way it comes?

I like the bulb myself. Subjectively, I just like how it looks and the feel of the little bulge deep down in there.

Sometimes, when I really have to go, I find the narrow tube slows things down. There is so much great info in it.

I find myself returning every few months to catch up and re-reading a lot of the valuable info. Thank you for taking the time and energy to teach us Want-To-Be-Thumpers!

You have said that the same size A Ring in plastic and steel did not work. I eventually settled into 40mm in the Steelheart but find the 42mm anatomical ring of the Looker 02 to be a much better fit.

Remember that the size you wear in a cock ring will be much too big for a chastity device. Cock rings assume a big old erection on the other side while a device will keep that mostly in check.

The less room your erection has to grow, the less room you need in the ring. How should I determine spacing between the Tube and A ring?

But the Steelheart appears to have less space at the top and more at the bottom. If this is a set parameter on the Steelheart, then do you add or subtract to the length of the tube to make up for this difference in measurement?

This gap is a function of the A-ring size and is another reason why getting that right is important. In the three devices I have from Dietmar, I always went with the default.

Have you tried this one? It seems like if the bottom of the ring curves back against the abdomen, the space between the bottom of the Ring and the bottom of the Tube gets even bigger, which sounds bad for security.

Yep, the Looker 02 has that and I love it. I also wear a 4ga ring, but not with the Steelheart. I found it took too much space inside the tube and caused pinching.

I wear a 10ga ring when locked up. Sounds like your experience is that you cannot fit anything larger than 8 gauge jewelry inside. I bet I could get even larger jewelry in there, but the heavier the ring the more noise will be made as it hits the inside of the tube.

How much added length and diameter should I add to the Tube to accommodate the PA fixing and jewelry, to achieve your setup? Finally, I also want to order a urethral insert for some added fun from time to time.

I realize I probably have to remove the PA for that. Do you use the insert with your Steelheart or only on your Looker? Any thoughts on how long the insert should be?

Is this purely personal choice or are there any security benefits? Does your insert have a bulb on the end? If yes, do you like it?

Does it help with leakage? Does the insert have a cap to screw on the end or is it always open at the end and prone to leaking? A Only on the Looker It could be a bit longer and still work.

C See question above. I do like the bulb. It may help with leakage. D The insert on the L02 I wear is integrated. Thank you very much for sharing your experiences with all of us and being such a fantastic source of info.

I was reading some of your blogs on the MM Jailbird cage and had a couple of questions in regards to the sizing. I have a double oval ring on the Jail Bird and recommend it.

The double ring does indeed add a bit of length you probably read that here so do cut that back from the overall length you order. One question I have is about the base ring.

Can you leave it on, while removing the cage, and then have sex? The idea just seems interesting: Have sex but probably no cumming and then put the cage back on.

Do you have any experience with this? First of all, you are very articulate and I can tell that you obey your wife and want to be obedient to her.

You are doing a great job and it shows. My Master who I signed a contract back on May 3, ; requires that I not have an orgasm.

This is very hard to accomplish. I have not been faithful to Master and had four since the order was issued. The most recent was after going two months with an orgasm.

I have been instructed to finger my boi pussy any time, I need to obtain pleasure or get horny. The longer I go without having an orgasm the more difficult, it is with me not cumming.

I will make this work. We are back to the beginning and will work hard to obey my order. I have also been ordered not to play with my dick or get it hard.

Extended, unsupervised denial without a device is incredibly hard for me. My advice would be for your Master to let you play with yourself on occasion for a specific period of time say, five minutes as long as you promise not to come.

That might help a bit. It would be a lot more enjoyable, I bet. First of let me say how useful your blog has been about male chastity.

That page helped a lot for the initial introduction to wearing a cb In fact, I think that page ultimately convinced the wife to go ahead with the purchase of the device.

But as I mentioned, we are very new to this. In fact, I think we have only had the device for a month now. And here is where I turn to your advice once more.

I am able to wear the cb throughout the day with no problem. We are able to go out, ride bikes, do groceries etc all without incident. This is of course fantastic as I did not expect it to be so easy.

But the real issue comes in at night when I try to sleep with the device. Like literally a pain in the sack pun?

This happens almost immediately once I start to lie horizontally, either on my back or on the side.

I know you have written about this in the tips and tricks page — I have tried those suggestions but still with little success. Here are some details: I am currently on the second smallest spacer but still the largest ring.

Most of the pain I feel is at the base of the ring the A ring? Initially it is ok but as the night wears on it gets worse and worse.

I do put silicon based lube on the A-ring and that helps. I never have the biting pain near the base of the penis where the tube starts.

Perhaps most importantly, I sleep in some shorts that are meant for runners. I usually wear pretty tight briefs but started sleeping without them as I thought that was part of the problem.

But as you mentioned, now things just flop around and that may be part of the issue. Sleeping naked did not work either; that was a bad idea.

So far no incidents, but days is easy going. But besides for that, I want to be locked up for her with the key around her neck, because that is so hot.

And she obviously likes that too. I can tell you the CB6K ring is a bitch and I recall being in a lot of pain sometimes as well.

The more lube, the better, I found. An in between measure would be looking into the Holy Trainer. Also, with time, your scrotum will stretch out.

That will lead to fewer ball sack problems. I had read recently on a blog that the cb had a larger ring not shipped initially.

If you contacted the company they would send it to you. I wonder if the same is true for the ? Apparently 2 mm does matter hah, another pun?

As far as I know, the only rings available for the CB6K are the ones packed in with it. I stumbled across your blog when someone left a review on lovehoney website about the cb6k and said they had recently been reading your blog.

Curiosity got the better of me, so I started reading and then I was hooked! I decided the only way to fully understand the situation, was to read from the beginning.

I am currently at August and obviously have a long way to go! I noticed Belle had answered a few questions in the blog and I was wondering if she has done anymore blogging?

Have you written any more porn? I read the hotel room one, where you described a situation in which you were exposed in front of a window.

I really enjoy your style of writing and your way of describing situations, that make the text come to life.

I have more ideas than time and writing it while locked up and denied is unexpectedly difficult. I get too worked up to think straight.

Have you got any tips for complete beginners, starting out experimenting with chastity? In the research I was able to do, nobody who had worn it had reported UTI as a problem.

No significant pain to speak of other than the weird cavitation thing I mentioned above and the expected discomfort during an erection.

I also guess the small bulb at the end of the tube makes it safer. I have worn shortly one where the tube just gets a little thinner at the tip, but it caused bleeding so I promptly stopped the experience.

Terrific review and information, thank you for writing it and sharing it with us. I am just about to get my first device, the Jail Bird. Maybe it is due to asymmetry of a testicles?

In normal state the left one is placed higher than other one so that rotated ring can give more comfort.

However, the Steelworxx website shows it as being a straight bend. HI, I just ordered the Looker 02 and I hope you can help me with a couple of questions while I still have a chance to change my order if necessary.

I ordered the tube removable. I am and will be locked long-term. I have had my balls busted very seriously a couple of times.

I think this is the reason I can not wear a regular cock ring like the one shown here. If I can get my cock and balls through it, my balls will work their way out during the night.

For that reason I have to wear a hinged ring that is very tight. You said something about being able to get away with a larger A ring than normal.

Do you think I might be able to up the size one notch and therefore be more comfortable. I realize this may be hard to answer. Finally, when you measured and ordered, did you and any extra room in length or width.

If so was it a good idea, if not, does it feel as good as I imagine it would to have it fit like a glove? My ring is about 43mm in diameter. I probably could have made the cage just a big shorter.

The circumference of the cage was the same as my Steelheart. It seems to work for me, though it could have been just a tad smaller and still work.

I often modify chastity devices. Some years ago I was experimented with a CB3K fitted with an adapted metal A ring and support system.

Later I turned up a plug in Stainless, about 70mm long, with a flange that kept it inside the device. This was inserted before the device was assembled and it worked OK, but tended to leak slightly.

After I read this I made a replacement with a bulb tip similar to the above and added a press fit stopper for the tip.

This works well, the stopper is simple to remove when needed. Perhaps something similar can be made for your device.

How can I send them to you? Does it stay that way, permanently or semi-permanently? Does it slam shut as if nothing was in there?

It gapes for a little while but closes up again. My question is whether or not there is like an end cap to close the opening of the urethral plug?

You might be able to fashion one after the fact, but it might fall out. Or Dietmar might be able to put some kind of screw-on thing.

I had similar concerns and made some extra wands plugs to use with my Looker 2. I turned screw in M4 plugs in Stainless to fit them.

One issue was dropping the tiny things when screwing them back in! So I skim them back; leaving a 10mm smooth section that slide in, thus locating the cap; followed by just 4mm of thread to secure it.

This works very well and is water tight. It also has a 2mm contact. Dietmar made a M3. This gave me an idia about the air-locking problem, what if the tube was rifled?

The vortex should suck the air right out. Sure, individual anatomies vary. When I wear it I spend the day in a state of semi arousal.

I really enjoy the feeling of the insert. They offer a penis ring size that is 1mm larger than my own shaft size. After having your L02 for some time now, would recommend ordering the size nearest to my own, or go up one size?

I see in your pic that there is space on your underside, caused by the urethral tube keeping everything centered.

But, does your shaft press firmly against the top? Hell, you even risk UTI without ever wearing a plug. The length of the Locker02 tube Thumper is using seems pretty decent to me without invading the body too much.

I think nothing non-medical should ever get near the place where the semen tube joins the urethra, and even less up the bladder of course.

Disregarding the risk of using non-surgical grade plastic, imagine that for some reason the metal end gets lose inside your body… yeah, I let you imagination work on that.

I think two precautions here can greatly reduce the risk again: After removal, clean it throughly, and maybe put it a few minutes in boiling water.

Also, keep it in a clean box, not just on some dusty shelf. There are two liquids that will be in contact with the plug.

It will keep both the inside and the outside of the plug clean, like it does normally for the inside of the urethra. Drinking normally and regularly going to the toilets will do just fine.

BUT urine is usually not in contact with metal, and it may crystallize on the inside but also the outside of the tube, making the surface rough, which may cause lesions during insertion or removal.

For this, cleaning the device with soap and water as soon as removed, shrubbing it to remove any residue, is a good idea, before you boil it. Pre-cum fluid WILL happen.

The tube is inserted in your penis, which is highly sensitive, and some semen will be produced and pass the tube.

Semen can dry inside, turning it into a nasties nest. This also means you have to clean both the outside but also the inside of the tube.

Boiling the device should remove some of the residue, but using something to scrub the inside would be ideal. Well, point 1 seems to bring to the conclusion that removing and reinserting the device too often is more dangerous, while point 2 says quite the opposite, and that the device needs regular maintenance to stay as safe as possible.

I personally think that the period between two insertions should not be less than a week. If you remove and insert it every day or two days, you greatly increase the risk of getting nasties in your body.

But it should also not be much longer, since then you take the risk of having crystals forming on the tube, and you may have difficulties removing the device, eventually harming yourself.

The crystal thing depends on the composition of your urine, so experiences may vary as usual. Thumper, are you able to provide a photo measuring the size of the plug and ball at the end?

To be honest, the plug looks smaller than the 8 sound. I have some concerns about ordering a device with a bulb on the end that would be too big to fit up my urethra.

Most commercial sounds are listed and fabricated in millimetre diameter sizes. The Looker 2 plugs have been made in various sizes.

They are normally quoted in millimetres diameter. The shaft is a limiting factor at 6mm diameter minimum since the threaded portion in the removable form is threaded to M6 and screws into the cap end of the tube and secured with a lock nut.

So the wall thickness is only 1. The teardrop shaped bulb end of mine is 8mm diameter. But the first one I received was 9mm utterly impossible for me.

In my opinion, the smallest practical bulb diameter for fabrication would be around 7mm. Bulb sizing is critical; just 1mm difference in maximum diameter is huge.

I have fabricated and used alternative plugs in Stainless myself. But I turn mine as a single part from solid bar.

Titanium is less reactive; which makes that safer for internal use. According to Dietmar, only 6mm and 8mm can be made by him, but I could purchase a 6mm plug without a bulb.

I am particularly interested in the titanium plug because of a nickel allergy which seems to react to most stainless steels, even I use 8 or 10mm solid stainless bar; then turn and drill the plug to my specification while straight in my lathe.

With an integrated shoulder which sets the rotation stop. Screw the plug into the tube section and carefully mark the top with a maker.

The plug is the hand curved in a vice. That part takes some finesse and experience. Finally I polish the plug on rotating buffs, using the right mops and cutting compound for Most of this is very basic engineering, I just finish it well.

Neither nickel or chromium cause me any problems, so is fine. Titanium bar stock is available on Ebay. Perhaps I should try some.

Das ist schon im Körper ohne jeden Eingriff von aussen natürlicher Weise so. Zum Einführen des Plugs haben wir ca. Na ja, enger geht der A- Ring nicht mehr Blutstau Rauskommen mögen manche immer noch, aber wieder rein niemals. Er ist in meinem Profilbild zu casino wiesbaden online. Danke sunnybj football live online deine Antwort.

02 looker -

Ein weiterer Ruined Orgasm in Keuschheit Ziel muss es primär immer sein, Entzündungen von Anfang an bestmöglich zu vermeiden, nicht sie zu behandeln! Ich halte den einzigen Schlüssel zu Ihrem Ich habe mich im alten CB nach ein paar mal tragen daran gewöhnt und konnte bis auf die Morgenlatte und das später auch nicht mehr total durchschlafen! Alle 2 Wochen reinigen, abkochen, desinfizieren und etwas gegen den Urinstein tun reicht. Dann wirst Du merken wir problemlos das ist. Jedenfalls fällt man dann nicht mit ewiger Putzerei auf. So und anders wird man dauerhaft um sorgfältige Pflege, Desinfektion und Beobachtung und situationsangepasste Entscheidungen nicht herumkommen. Sie werden, dass die Keuschheit Gerät für Sports that require cups. One issue was dropping the tiny things when screwing them back in! D The insert on the L02 I lol esports wetten is integrated. Perhaps I should try some. Essentially what I want to ask is what you think might be the best course of action? Yes, I should go back and change that. Oh, and a completely disconnected question: If your scrotum is tight and they all start out that way, to a certain extentthe square rings are absolute torture. I'm considering buying the Looker 2 device. It kinda hurts, to be honest. This works very well and is Beste Spielothek in Uetze finden tight. Zum Looker 02 da störte der Plug vor allem meiner liebsten, denn er soll beim schwimmen gehen, auch in Chlorwasser stand halten. The Looker 02 was added to our catalog on Saturday 04 September, Natürlich kommt es auch immer auf den Keuschling selber an,man muss sich einfach darüber im Klaren sein,das ein KG niemals die absolute Sicherheit gegen Selbstbefriedigung ist,er soll nur ein Verlangen danach wirkungsvoll verhindern und ich denke das erfüllen diese Schellen sehr gut. Plugs verursachen, vorsichtig angewandt, keinerlei Narben Ist schon klar das dieses Piercing auch durch die Harnröhre geht. Messingschrott an die in der Bestätigungsmail angegebene Adresse. Ich glaub er wird sich so im Zaum halten. Ihnen entstehen keine Fahrtkosten, keine Einstellgebühren und eine Versandkostenpauschale bezahlen wir Ihnen für den an uns verkauften Kupferschrott oder Messingschrott oben drauf. Der Käfig darf auch noch deutlich kürzer werden - aber dann ist die Frage, wie man bei derart "tightem" Sitz dann die Hygiene handhabt, wenn der KG eine Dauereinrichtung mit möglichst wenigen Aufschlüssen sein soll. Let yourself be captured and preserve your chastity. Ein Dauertragen ist auch bei meinem KG absolut möglich,das beste Beispiel bin ich da wohl selber,denn ich trage diesen KG seit Oktober mit wenigen Ausnahmen durchgehend. Aber ok, wer es mag.

0 comments

Hinterlasse eine Antwort

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind markiert *

*